Excalibur AL-1650-EDPB Guía de instalación descargar pdf (Pagina 12)

Step 1 Have all transmitters which are to operate the system at hand� Then, turn the ignition “on”�

If the Unauthorized T

ransmitter Alert feature is on, programming a transmitter to the

system will activate the “UTA” warning and the extended Status Light indication

�

For the next 48 hours, the horn will sound a brief series of chirps every time the

vehicle’s ignition key is turned on�

Step 3 Press the “lock” button on each remaining transmitter one at a time� The system will chirp

thehornoncetoconrmthateachwaslearned.Thetransmitter’

otherthreebutton’sfunctions

will automatically be assigned when the “lock” button is learned� If a code is not received within a

10 second period, the learning process will automatically terminate, as indicated by another horn

honk�

Step 2 Within 5 seconds of turning on the ignition, press the Valet Switch 5 times� The horn will

brieysound,conrmingthatforthenext10secondsthesystemisreadytolearnatransmitter/

controller code� T

o enter a code, simply press and release the “lock”

button.Whentherstcode

is learned all existing stored codes will be erased�

Special Programming procedure to turn On the UTA

feature: Using this method to program

transmitters or optional controllers, and to turn on the Unauthorized Transmitter Alert feature

�

Follow the same steps as the Standard Programming, but on any transmitter/controller being

programmed instead of pressing the “lock” button, press the “lock” and the “unlock” buttons

together� This action turns

on the Unauthorized Transmitter Alert feature and at the same time

programs the transmitter or controller to operate the system

�

Standard Programming: Using this method to program additional or replacement transmitters

does not turn on or otherwise affect the Unauthorized

Transmitter Alert (UTA) feature

�

Once the Unauthorized T

ransmitter Alert feature is turned on, the warning will sound for 48

hours after any transmitter programming, including the programming session which was used to

turn it on

� This feature can only be turned of

f again by sending the system back to Omega for a

reset

�

Programming T

ransmitters

1 2 ... 7 8 9 10 11 12 13 14

Sin comentarios

Excalibur AL-1650-EDPB Guía de instalación Pagina 12