Excalibur AL-1650-EDPB Guía de instalación descargar pdf (Pagina 6)

6 Pin Secondary Wire Harness

PINK WIRE - 3RD CHANNEL (-) OUTPUT

This output provides a 250mA negative output when the CH3 function is activated by the con

troller

� The output will remain as long as the controller button(s) is held�

CONNECTION: Connect this wire to any desired add-on accessory that can utilize a negative

activation input�

WHITE/BLUE WIRE - REMOTE START ACTIVA

TION

(-) INPUT

This input will activate the system’

s remote start function when it receives a negative pulse

�

Another pulse during remote start operation will turn of

f the remote start

�

CONNECTION: Connect this wire to any device that you desire to activate the remote start fea-

ture� It requires a negative pulse input�

WHITE WIRE - ALARM ARM (-) INPUT

This input will arm the system’s alarm when it receives a negative pulse�

CONNECTION: Connect this wire to any device that you desire to arm the alarm� It requires a

negative pulse input�

BROWN WIRE - ALARM DISARM (-) INPUT

This input will disarm the system’

s alarm when it receives a negative pulse

�

CONNECTION: Connect this wire to any device that you desire to disarm the alarm� It requires a

negative pulse input�

LT� GREEN/RED WIRE - OEM ALARM ARM / CH4 (-) OUTPUT

This output provides a 250mA negative pulse when remote start is activated and when the

system’

s alarm is disarmed

� It can be programmed for 5th channel output with installer feature #9�

CONNECTION: Connect this wire to the vehicle’s OEM alarm disarm circuit� T

ypically, it will show

ground when the door cylinder key is turned to the unlock position

�

LT� GREEN/BLACK WIRE - OEM ALARM DISARM / CH5 (-) OUTPUT

This output provides a 250mA negative pulse when remote start is turned of

f and when the

system’s alarm is armed

� It can be programmed for 4th channel output with installer feature #9�

CONNECTION: Connect this wire to the vehicle’s OEM alarm arm circuit� T

ypically, it will show

ground when the door cylinder key is turned to the lock position

�

3 Pin Satellite Relay Port (RED)

GREEN WIRE - START (-) OUTPUT

This output provides a 250mA negative pulse when the large VIOLET

start wire is active

�

CONNECTION: If a negative starter circuit is needed, connect this directly to the vehicle’s nega-

tive starter circuit� Otherwise, use a relay (or RS-RP module) to convert this to a high current

circuit�

BLUE WIRE - IGNITION (-) OUTPUT

This provides a 250mA negative output when the large PINK ignition wire is active�

CONNECTION: If a negative ignition circuit is needed, connect this directly to the vehicle’s nega-

tive starter circuit� Otherwise, use a relay (or RS-RP module) to convert this to a high current

circuit�

RED WIRE - CONSTANT (+) OUTPUT

This output provides a 500mA positive output to drive the positive pin of added relay coils�

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comentarios a estos manuales

Sin comentarios

Excalibur AL-1650-EDPB Guía de instalación Pagina 6

Comentarios a estos manuales